Full-Synthetic Passenger Car Engine Oil
MAXX Solutions Full Synthetic Motor Oil is a premium quality, full-synthetic automotive engine oil designed to provide maximum engine protection for turbocharged gasoline direct-injection, conventional gasoline-fueled and flex-fueled passenger cars and light trucks under all operating conditions. It is particularly recommended for vehicles operating at extreme temperatures or under severe driving conditions, such as towing heavy loads.Features & Benefits
- Helps protect against low speed pre-ignition (LSPI) in turbocharged gasoline direct-injection engines (TGDI)
- Exceeds ILSAC GF-5 requirements for new cars under warranty
- Enhanced performance benefits at extreme temperatures compared with conventional engine oils
- Outstanding resistance to viscosity and thermal breakdown at high temperatures
- Protects against sludge and varnish formation
- Protects against rust and bearing corrosion
- Low volatility for reduced oil consumption
- Excellent low-temperature pumpability for protection during cold starts
- Highly resistant to foaming
- Formulated to protect turbochargers and emission control system catalysts
- Formulated for use in vehicles operating on ethanol-containing fuels up to E85
Applications
- Turbocharged gasoline direct-injection, conventional gasoline-fueled and flex-fuel passenger cars, light trucks and sport utility vehicles, including gasoline-electric hybrids, especially when operating under severe conditions
- Four-stroke cycle gasoline engines in other mobile or stationary equipment
5W-20
Licenses & Approvals
MAXX Solutions Full Synthetic Motor Oil is licensed for:
- ILSAC GF-5
- API Service SN Plus with Resource Conserving
MAXX Solutions Full Synthetic Motor Oil meets or exceeds the requirements of:
- Chrysler MS-6395
- Ford WSS-M2C945-A (SAE 5W-20)
- Ford WSS-M2C945-B1 (SAE 5W-20)
- Ford WSS-M2C946-A (SAE 5W-30)
- Ford WSS-M2C946-B1 (SAE 5W-30)
- Ford WSS-M2C947-A (SAE 0W-20)
- Ford WSS-M2C947-B1(SAE 0W-20)
- GM6094M (obsolete specification)
Additional Details
SAE Grade | 5W-20 |
Specific Gravity @ 60°F | 0.848 |
Density, lbs/gal @ 60°F | 7.06 |
Color, ASTM D1500 | 3 |
Flash Point (COC), °C (°F) | 229 (444) |
Pour Point, °C (°F) | -41 (-42) |
Viscosity, Kinematic | |
cSt @ 40°C | 45.4 |
cSt @ 100°C | 8.4 |
Viscosity Index | 164 |
Cold Cranking Viscosity, cP | 3650 |
°C | (-30) |
High-Temp/High-Shear Viscosity, cP @ 150°C | 2.6 |
Sulfated Ash, ASTM D874, wt % | 0.96 |
Total Base Number (TBN), ASTM D2896 | 8 |
Phosphorus, wt % | 0.077 |
Zinc, wt % | 0.085 |
0W-20
Licenses & Approvals
MAXX Solutions Full Synthetic Motor Oil is licensed for:
- ILSAC GF-5
- API Service SN Plus with Resource Conserving
MAXX Solutions Full Synthetic Motor Oil meets or exceeds the requirements of:
- Chrysler MS-6395
- Ford WSS-M2C945-A (SAE 5W-20)
- Ford WSS-M2C945-B1 (SAE 5W-20)
- Ford WSS-M2C946-A (SAE 5W-30)
- Ford WSS-M2C946-B1 (SAE 5W-30)
- Ford WSS-M2C947-A (SAE 0W-20)
- Ford WSS-M2C947-B1(SAE 0W-20)
- GM6094M (obsolete specification)
Additional Details
SAE Grade | 0W-20 |
Specific Gravity @ 60°F | 0.847 |
Density, lbs/gal @ 60°F | 7.05 |
Color, ASTM D1500 | 3 |
Flash Point (COC), °C (°F) | 229 (444) |
Pour Point, °C (°F) | -43 (-45) |
Viscosity, Kinematic | |
cSt @ 40°C | 46 |
cSt @ 100°C | 8.8 |
Viscosity Index | 174 |
Cold Cranking Viscosity, cP | 5000 |
°C | (-35) |
High-Temp/High-Shear Viscosity, cP @ 150°C | 2.6 |
Sulfated Ash, ASTM D874, wt % | 0.96 |
Total Base Number (TBN), ASTM D2896 | 8 |
Phosphorus, wt % | 0.077 |
Zinc, wt % | 0.085 |
5W-30
Licenses & Approvals
MAXX Solutions Full Synthetic Motor Oil is licensed for:
- ILSAC GF-5
- API Service SN Plus with Resource Conserving
MAXX Solutions Full Synthetic Motor Oil meets or exceeds the requirements of:
- Chrysler MS-6395
- Ford WSS-M2C945-A (SAE 5W-20)
- Ford WSS-M2C945-B1 (SAE 5W-20)
- Ford WSS-M2C946-A (SAE 5W-30)
- Ford WSS-M2C946-B1 (SAE 5W-30)
- Ford WSS-M2C947-A (SAE 0W-20)
- Ford WSS-M2C947-B1(SAE 0W-20)
- GM6094M (obsolete specification)
Additional Details
SAE Grade | 5W-30 |
Specific Gravity @ 60°F | 0.851 |
Density, lbs/gal @ 60°F | 7.09 |
Color, ASTM D1500 | 3 |
Flash Point (COC), °C (°F) | 235 (455) |
Pour Point, °C (°F) | -40 (-40) |
Viscosity, Kinematic | |
cSt @ 40°C | 61.2 |
cSt @ 100°C | 10.9 |
Viscosity Index | 171 |
Cold Cranking Viscosity, cP | 4900 |
°C | (-30) |
High-Temp/High-Shear Viscosity, cP @ 150°C | 3 |
Sulfated Ash, ASTM D874, wt % | 1.02 |
Total Base Number (TBN), ASTM D2896 | 8.6 |
Phosphorus, wt % | 0.077 |
Zinc, wt % | 0.085 |
10W-30
Licenses & Approvals
MAXX Solutions Full Synthetic Motor Oil is licensed for:
- ILSAC GF-5
- API Service SN Plus with Resource Conserving
MAXX Solutions Full Synthetic Motor Oil meets or exceeds the requirements of:
- Chrysler MS-6395
- Ford WSS-M2C945-A (SAE 5W-20)
- Ford WSS-M2C945-B1 (SAE 5W-20)
- Ford WSS-M2C946-A (SAE 5W-30)
- Ford WSS-M2C946-B1 (SAE 5W-30)
- Ford WSS-M2C947-A (SAE 0W-20)
- Ford WSS-M2C947-B1(SAE 0W-20)
- GM6094M (obsolete specification)
Additional Details
SAE Grade | 10W-30 |
Specific Gravity @ 60°F | 0.852 |
Density, lbs/gal @ 60°F | 7.1 |
Color, ASTM D1500 | 3 |
Flash Point (COC), °C (°F) | 232 (450) |
Pour Point, °C (°F) | -39 (-38) |
Viscosity, Kinematic | |
cSt @ 40°C | 63.2 |
cSt @ 100°C | 10.4 |
Viscosity Index | 153 |
Cold Cranking Viscosity, cP | 3750 |
°C | (-25) |
High-Temp/High-Shear Viscosity, cP @ 150°C | 3.1 |
Sulfated Ash, ASTM D874, wt % | 0.96 |
Total Base Number (TBN), ASTM D2896 | 8 |
Phosphorus, wt % | 0.077 |
Zinc, wt % | 0.085 |
0W-16
Licenses & Approvals
MAXX Solutions Full Synthetic Motor Oil is licensed for:
- ILSAC GF-5
- API Service SN Plus with Resource Conserving
MAXX Solutions Full Synthetic Motor Oil meets or exceeds the requirements of:
- Chrysler MS-6395
- Ford WSS-M2C945-A (SAE 5W-20)
- Ford WSS-M2C945-B1 (SAE 5W-20)
- Ford WSS-M2C946-A (SAE 5W-30)
- Ford WSS-M2C946-B1 (SAE 5W-30)
- Ford WSS-M2C947-A (SAE 0W-20)
- Ford WSS-M2C947-B1(SAE 0W-20)
- GM6094M (obsolete specification)
Additional Details
SAE Grade | 0W-16 |
Specific Gravity @ 60°F | 0.846 |
Density, lbs/gal @ 60°F | 7.05 |
Color, ASTM D1500 | 3 |
Flash Point (COC), °C (°F) | 229 (444) |
Pour Point, °C (°F) | -43 (-45) |
Viscosity, Kinematic | |
cSt @ 40°C | 37.3 |
cSt @ 100°C | 7.3 |
Viscosity Index | 163 |
Cold Cranking Viscosity, cP | 5000 |
°C | (-35) |
High-Temp/High-Shear Viscosity, cP @ 150°C | 2.3 |
Sulfated Ash, ASTM D874, wt % | 0.96 |
Total Base Number (TBN), ASTM D2896 | 8 |
Phosphorus, wt % | 0.077 |
Zinc, wt % | 0.085 |